|
|
Return to Main Products Menu
|
|
 |
Uses
Surface
Compound
Benefit
Border
Thickness
Colour
Sizes
|
Entrance mat ( For a Mat well or loose lay )
Raised nubs face moulded with material fibre, Waffle pattern. The logo or design is applied to a smooth panel in the centre of the mat (as shown on the mat pictured).
Polypropylene with resilient rubber backing. Flocked logo made up of thousands of individual coloured fibres.
Entrymaster Logo custom mat have a flecked appearance which is effective and hiding dirt and debris. This crush resistant mat also has containment borders allowing it to effectively trap water and debris, and a slip resistant nitrile rubber backing making it perfect for use in wet areas. the mat will not deteriorate and slide around if constantly exposed to high levels of traffic, liquids, dirt. No ink or dye process. We fire thousands of individually coloured fibers into the mat then heat cure and cross link them into place. The fade resistance is far superior to any other alternative.
Moulded rubber edges on all sides
10mm
Charcoal, Grey.
800 mm x 950 mm, 900 mm x 1450 mm
Other sizes available upon request |
 |
 |
|
|
 |
 |
|
|
Description:
You will not find another mat in Australia like the Entrymaster logo mat! What better way to advertise your logo or message than on the 'Rolls Royce' of entry mats - a cleverly constructed durable mat specifically created for the protection of floors from dirt and water.
The mat itself is made of a solution-dyed 100% polypropylene fabric that is quick drying and fade resistant. As with the Dura Flock Logo Mat, the black and grey backgrounds of the Entrymaster Logo custom mat have a flecked appearance which is effective and hiding dirt and debris. This crush resistant mat also has containment borders allowing it to effectively trap water and debris, and a slip resistant nitrile rubber backing making it perfect for use in wet areas. The logo or design is applied to a smooth panel in the centre of the mat (as shown on the mat pictured).
Both the nitrile backing and the mat face are certified as 'high traction' by the National Floor and Safety Institute. This means the mat will not deteriorate and slide around if constantly exposed to high levels of traffic, liquids, dirt.
Your logo can be carefully reproduced via our no ink or dye process. We fire thousands of individually coloured fibers into the mat then heat cure and cross link them into place. As there is no piece dying involved, the fade resistance is far superior to any other alternative. This makes the EntryMaster Logo not only an extremely functional mat by removing and trapping dirt, oil or moisture off shoes before they reach your floor, it also has the capability for personalisation by applying your logo or message.
The EntryMax mat is suitable for inside and outside entrances such as at workshops or passage ways between factories and offices wherever tracking is a problem.
Sizes:
800 mm x 950 mm
900 mm x 1450 mm
Other sizes available upon request |
|
2/169 Grange Road, Fairfield, Victoria 3078 Phone: (03) 9499 5991 Fax: (03) 9499 5961
Email: bardwell@bardwellmatting.com.au Web Site: www.bardwellmatting.com.au |
|
|
|
|
|
|
|
